新型短路測試裝置的研制
陳西
（蘇州西門子電器有限公司，江蘇 蘇州 215129）
摘 要：低壓斷路器在研發階段需要做大量的短路試驗來驗證其在短路條件下的接通分?jǐn)嗄芰Α覙?biāo)準中定義的短路試驗操作順序?yàn)?ldquo;O—t—CO—t—CO”，其中t 至少為3 min。為了縮短研發測試時間，研發了一種半自動化高效率的短路測試裝置，該裝置能有效地避開等待時間提高測試效率。給出了該裝置的結構圖并分析了其高效的工作原理。經性能測試表明，該裝置大大地提高了測試效率，其對低壓斷路器的研發有一定的意義。
關鍵詞：小型斷路器；短路試驗；操作順序；等待時間
中圖分類號：TM561 文獻標識碼：A 文章編號：1007-3175(2020)11-0066-03
New Short-Circuit Test Facility Manufacture
CHEN Xi
（Siemens Electrical Apparatus Ltd, Suzhou 215129, China）
Abstract: A lot of short-circuit tests are implemented to verify the short-circuit making and breaking capability during low voltage apparatus research and development. The short-circuit test operation sequence defined in national standard is “O — t — CO — t — CO ”, the waiting time is 3 minutes at least. Traditionally, a lot of samples are used to test and one test sample one time, this means needing more test time. Based on this situation, one semi-automatic high efficiency short-circuit test equipment was developed to avoid the waiting time. The structure diagram is given and principles of high efficiency are analyzed. The test result shows this equipment can improve test efficiency; it is meaningful for low voltage apparatus research and development.
Key words: miniature circuit breaker; short-circuit test; operation sequence; waiting time
參考文獻
[1] 陸儉國，張乃寬，李奎. 低壓電器的試驗與檢測[M]. 北京：中國電力出版社，2007.
[2] 中國電器工業協會. 低壓開關設備和控制設備 第2部分：斷路器：GB 14048.2—2008[J]. 北京：中國標準出版社，2009：26-27.
