塑殼斷路器電動操作機構可靠性試驗裝置
張晶1，陸儉國1，李奎1， 陳杰2
1 河北工業大學 省部共建電磁場與電器可靠性重點實驗室，天津 300130；
2 唐山市曹妃甸供水有限公司，河北 唐山 063210
摘 要： 介紹了一種以工控機為控制核心的塑殼斷路器電動操作機構可靠性試驗裝置，分析了可靠性試驗方法，設計了驅動電路和狀態監測電路。試驗裝置能夠實時監測電動操作機構和斷路器的狀態，實現故障自診斷。控制軟件基于Visual Basic 6.0 平臺并采用模塊化設計思想設計，多界面設計便于用戶對試驗裝置的操作。
關鍵詞： 電動操作機構；斷路器；試驗裝置；可靠性試驗
中圖分類號：TM561 文獻標識碼：B 文章編號：1007-3175(2013)03-0040-05
Electrical Operating Mechanism Reliability Test Device of Molded Case Circuit Breaker
ZHANG Jing1, LU Jian-guo1, LI Kui1, CHEN Jie2
1 Province & Ministry Joint Built Electro-Magnetic Field and Electrical Apparatus Reliability Key Lab, Hebei University of Technology,
Tianjin 300130, China; 2 Tangshan Caofeidian Water Supply Co., Ltd, Tangshan 063210, China
Abstract: Introduction was made to a kind of electrical operating mechanism reliability test device of molded case circuit breakers with an industrial controller as the control core. Analysis was made to the reliability test method. This paper designed the driving circuit and status monitoring and test circuit. The test device can monitor the status of electrical operating mechanism and circuit breaker in real time, to realize fault self-diagnoses. The control software was based on Visual Basic 6.0 and the modularized idea was adopted for design. It is convenient for users to operate the test device with multi-interface design.
Key words: electrical operating mechanism; circuit breaker; test device; reliability test
參考文獻
[1] 楊超君.塑殼式斷路器電動操作機構現狀和發展動向[J].低壓電器，2010(21)：9-12.
[2] 賈暢鵬. 固態繼電器的特性及應用[J]. 煤炭技術，2007，26(1)：33-34.
[3] GB/Z 22074-2008 塑料外殼式斷路器可靠性試驗方法[S].
[4] 范逸之.Visual Basic硬件設計與開發[M].北京：清華大學出版社，2004.
[5] Zhao Peng, Li Kui, Fu Changqing. Research on the Devicef or Reliability of AC
Contactor[C]//Proceedings of the 2nd International Conference on Reliability of
Electrical Products and Electrical Contacts, Xiamen, China, 2007.
[6] 李紀云，裴紅星.基于VB的虛擬數字存儲示波器[J].儀器儀表與分析監測，2005(3)：24-25.
