大型變壓器抗短路能力校核分析系統的開發及應用
頓玲，魏亞軍，杜平
華中科技大學 電氣與電子工程學院，湖北 武漢 430074
摘 要：以Visual Basic(VB)軟件編寫友好的用戶界面為基礎，通過界面輸入參數數據，結合ANSYS軟件的二次開發工具APDL語言，實現ANSYS參數化設計，開發了大型變壓器抗短路能力校核分析軟件。以一臺220kV變壓器為例分析，結果表明，該系統是可行有效的，在工程中具有進一步推廣和應用價值。
關鍵詞：ANSYS軟件；VB軟件；參數化；有限元分析
中圖分類號：TM411 文獻標識碼：A 文章編號：1007-3175(2013)07-0025-05
Development and Application of Anti-Short-Circuit Ability Calibration Analysis System for Large-Capacity Transformer
DUN Ling, WEI Ya-jun, DU Ping
College of Electrical & Electronic Engineering, Huazhong University of Science & Technology, Wuhan 430074, China
Abstract: Taking friendly user’s interface based on Visual Basic (VB) as the foundation, this paper combined with secondly developing tool APDL language of ANSYS software to realize ANSYS parametric data design with data put into interface, developing anti-short-circuit ability calibration and analysis software of large-capacity transformers. The analysis of a 220kV transformer shows that the system is feasible and valid with further value for popularization and application in project.
Key words: ANSYS software; Visual Basic software; parametrization; finite element analysis
[1] 王卿瑋.變壓器運行中短路損壞事故及原因分析[J].中國新技術新產品，2009(16)：119.
[2] 姜益民.變壓器抗短路能力簡析[J].變壓器，2002，39(4)：26-31.
[3] Li Hongkui, Li Yan, Li Dongxue, et al. Analysis and Computation of Electromagnetic Force in Three-Phase Power Transformer by Using Field-Circuit Coupled Method[C]//Proceedings of International Conference on Electrical Machines and Systems, Tokyo, Japan, 2009：l-4.
[4] Li Hongkui, Li Yan, Sun Xin, et al. Analysis of three-phase power transformer windings forces caused by magnetic inrush and short-circuit currents[C]// Proceedings of Applied Superconductivity and Electromagnetic Devices, Chengdu, China, 2009：233-236.
[5] 童昕宏，夏永明，葉云岳，盧琴芬.基于VB的ANSYS參數化設計及其在電機磁場分析中的應用[J].微電機：伺服技術，2006，39(8)：31-33.
[6] 彭公孚，席長友.基于VB控件開發的ANSYS程序調用方法[J].武漢理工大學學報：交通科學與工程版，2004，28(1)：148-150.
[7] GB1094.5-2008 電力變壓器[S].
[8] GB/T15544-1995 三相交流系統短路電流計算[S].
[9] 梁振光，唐任遠.大型電力變壓器繞組的短路強度問題[J].變壓器，2003，40(8)：9-12.
