基于Multisim10仿真軟件的多輸出直流穩壓電源設計
劉磊，胡海燕，李偉達，李娟，秦佳
蘇州大學 機電工程學院，江蘇 蘇州 215021
摘 要：提出了一種多輸出線性直流穩壓電源的設計，以固定式集成穩壓器為核心，可以提供多個固定的直流電壓輸出。使用EDA軟件平臺Multisim10對電源設計過程進行仿真分析，針對仿真過程中發現的問題提出解決方案，提高了實驗效率。經對電源樣機的實驗測試，該電源性能良好、工作可靠，輸出電壓和輸出電流、穩壓系數和紋波電壓均滿足設計要求，可以滿足實驗設備對多種直流電的需要。
關鍵詞：直流穩壓電源；多輸出；Multisim10仿真軟件
中圖分類號：TN86 文獻標識碼：A 文章編號：1007-3175(2013)08-0025-04
Design of Multi-Output DC Stabilized Voltage Supply Based on Multisim10
LIU Lei, HU Hai-yan, LI Wei-da, LI Juan, QIN Jia
School of Mechanical and Electric Engineering, Soochow University, Suzhou 215021, China
Abstract: This paper raised design of a kind of linear multi-output direct current (DC) stabilized voltage supply, which was based on fixed type stabilized voltage integrated circuits (ICs), providing multiple fixed DC voltage outputs. EDA software platform, Multisim 10 was used to simulate and analyze the design process of power supply. In allusion to problems in simulation process, this paper raised settling plan to improve the efficiency of the experiment. The test for the prototype has proved that this type of power supply is good in performance, reliable in work, meeting the design requirements of output voltage, output current, stabilized voltage coefficient and output ripple voltage, as well as multi-DC requirements for experimental equipment.
Key words: direct current stabilized voltage supply; multi-output; Multisim10 simulation software
參考文獻
[1] 孔保軍.直流穩壓電源的設計及制作[J].電子制作，2006(6)：38-40.
[2] 李雪麗，陳偉，李運生，等.基于Proteus的雙直流穩壓電源的設計與仿真[J].制造技術與機床，2010(12)：53-57.
[3] 王聰敏，李少娟，林艷紅，等.直流穩壓電源的設計[J].西安郵電學院學報，2011，16(S1)：103-105.
[4] 殷紅彩，葛立峰.一種多輸出直流穩壓電源的設計[J].傳感器世界，2006，12(9)：22-25.
[5] 黃麗賢.基于Multisim的直流穩壓電源的仿真分析[J].光盤技術，2008(10)：38.
[6] 楊瑞蘭，翟學東.基于Multisim的直流穩壓電源設計[J].電子測試，2007(4)：37-41.
