一種用于疊層間隙型防雷器的功能指示電路
高煊慧，蔡衛
（菲尼克斯亞太電氣(南京)有限公司，江蘇 南京 211100）
摘 要：設計了一種用于疊層間隙型防雷保護器的功能指示電路。該電路利用間隙擊穿電壓和指示電路動作電壓比較原理，結合熔絲、發光管等器件，通過電子方式和機械方式完成對防雷器功能的指示。基于相關標準，測試了與防雷器的浪涌沖擊配合效果，試驗驗證表明，該指示電路可以有效地指示多層( 疊層) 間隙型防雷器的功能狀態，使終端客戶方便、清晰地確認防雷器的性能狀況。
關鍵詞：防雷器；疊層間隙；功能指示電路
中圖分類號：TM862 文獻標識碼：A 文章編號：1007-3175(2016)08-0025-05
A Kind of Function Indication Circuit Used for Gap-Stack
Type of Lightning Protection Device
GAO Xuan-hui, CAI Wei
（Phoenix Contact Asia-Pacific (Nanjing) Co., Ltd, Nanjing 2111 00, China）
Abstract: This paper designed a kind of function indication circuit used for gap-stack type of lightning protection device. This circuit used the principle of comparing the gap breakdown voltage with the indication circuit operation voltage. Combined with the fuses and the luminous tube devices, this system indicated the functions of lightning protection device via the electronic mode and the mechanical mode. On the basis of the relevant standard, the results of surge impact coordinated with the lightning protection device were tested. The experimental verification shows that this indication circuit can effectively indicates the functional status of gap-stack lightning protection device to make the terminal client conveniently and clearly affirm the performance conditions of the lightning protection device.
Key words: lightning protection device; gap-stack; function indication circuit
參考文獻
[1] IEC 61643-11:2011 Low-voltage surge protective devices-Part11: Surge protective devices
connected to low-voltage power systems-Requirements and tests[S].
[2] GB 18802.1—2011 低壓電涌保護器(SPD) 第1 部分：低壓配電系統的電涌保護器 性能要求和試驗方法[S].
