一起500 kV斷路器拒動故障原因分析及改進措施
石萬里，夏武
（中國南方電網超高壓輸電公司柳州局，廣西 柳州 545006）
摘 要：介紹了倒閘操作過程中5051 斷路器分閘不成功事件過程，通過對該故障斷路器進行拆分檢查、測試及分析，指出該斷路器發(fā)生軸承銹蝕導致合閘彈簧未完全釋放，不能給分閘彈簧儲能，是斷路器分閘不成功的主要原因，針對此類斷路器故障并從一次結構、二次信號回路等方面提出改進措施，避免了斷路器拒動故障的發(fā)生。
關鍵詞：斷路器；拒動；儲能；改進
中圖分類號：TM561 文獻標識碼：A 文章編號：1007-3175(2017)02-0059-04
Analysis and Improvement Measures of Refusal-Operation Failure Cause of 500 kV Circuit Breaker
SHI Wan-li, XIA Wu
（Liuzhou Bureau of China Southern Power Grid Extra High Voltage Power Transmission Company, Liuzhou 545006, China）
Abstract: Introduction was made to the refusal-operation of 5051 circuit breakers in the process of switching operation. This paper carried out splitting inspection, test and analysis for the malfunction circuit breaker and pointed out that the rusting bearings made the closing spring not completely released in the circuit breaker, which couldn’t store energy for the tripping spring, being the main reason of unsuccessful tripping of the circuit breaker. In allusion to this type of circuit breakers faults, the primary structure and the second signal circuits, this paper proposed improved measures, so as to prevent the circuit breakers refusal-operation from happening.
Key words: circuit breaker; refusal-operation; stored energy; improvement
參考文獻
[1] 宋宇. 斷路器拒動故障原因分析及預防處理措施[J]. 現代制造，2014(30)：40-41.
[2] 舒雙焰，趙有鋮，趙曼勇，等.“1.20”安順電廠斷路器拒動保護動作分析[J]. 電力系統保護與控制，2008，36(18)：103-107.
[3] Q/CSG 10006—2004 電氣操作導則[S].
[4] Q/CSG 21003—2008 中國南方電網電力調度管理規(guī)程[S].
[5] 金長軍，楊紹露. 淺析防止500 kV斷路器拒動的措施[J]. 黑龍江科技信息，2011(30)：6.
