GW4隔離開關觸指彈簧更換工具的設計
郭艷，賈霖，張偉
（國網江蘇省電力公司常州供電公司，江蘇 常州 213003）
摘 要：針對GW4 型戶外隔離開關觸指彈簧手工更換難度大、耗時長、觸指片易損壞、檢修人員易受傷的問題，設計了一種GW4 型隔離開關觸指彈簧更換專用工具。設計方案采用雙向壓縮法，選擇三角型裝置壓縮彈簧，通過上部加裝螺栓及底部焊接金屬條方式固定C 型金屬板，并使用45# 鋼鐵制作工具。與傳統手工工作方法相比，所設計工具縮短了觸指彈簧更換時間，提高了工作效率，并且可避免觸指片損壞及對檢修人員人身傷害。
關鍵詞：GW4 隔離開關；觸指彈簧；專用更換工具；雙向壓縮
中圖分類號：TM564.1 文獻標識碼：A 文章編號：1007-3175(2017)04-0054-04
Design of Special Tool for Replacing Contact Finger Spring of GW4 Disconnector
GUO Yan, JIA Lin, ZHANG Wei
（State Grid Changzhou Power Supply Company of Jiangsu Power Company, Changzhou 213003, China）
Abstract: In allusion to the tough issues about manually replacing the contact finger spring of GW4 disconnector, a special tool was designed to prevent contact finger damage and personal injury as well as reducing replacement time. The designing scheme adopted the idea of biaxial compression and chose the trigonal fixture to compress the spring. The C-type metal plate was clamped by mounting bolt on the top and welding metal bars on the bottom. No. 45 steel was used to manufacture the tool. Compared to the traditional manual method, the developed tool reduced the replacement time of the contact finger spring, improved the work efficiency and prevented the contact finger damage as well as the personal injury effectively.
Key words: GW4 disconnector; contact finger spring; special tool; biaxial compression
參考文獻
[1] 許勝杰，曾慶天. 淺談GW4 隔離開關行業的發展[J].黑龍江科技信息，2014(8)：90.
[2] 古紅軍. GW4型高壓隔離開關的故障檢修對策[J].技術與市場，2015，22(9)：80-81.
[3] 唐錚，滑春桃. 對GW4系列隔離開關運行檢修中異常現象的分析[J]. 電力設備，2005，6(5)：60-62.
[4] 顏超. GW4型戶外式高壓隔離開關常見缺陷及改進措施[J]. 電世界，2012，53(2)：37-39.
[5] 強寶仁，高占世. GW4系列隔離開關運行檢修中異?，F(xiàn)象的分析與對策[J]. 電力學報，2007，22(1)：115-117.
[6] 馮普俊，劉生輝，趙振業. GW4隔離開關拆裝專用工具的研發[J]. 廣西電力，2016，39(2)：50-52.
